No, I am not suggesting you smuggle your camera into Nekkid a-go-go; the
bouncers in these places tend to frown on such antics. What I am suggesting this
week is that you experiment with the time exposure facility on your DSLR.
Yes, this is a time where the trusty compact will not do the
job for you, and let’s face it, you bought an SLR because of its capabilities to
take different photos, and for you to have fun experimenting with taking ‘real’
photographs and not just ‘record’ shots. A ‘record’ shot is one of wet people at
Songkran for example, ‘recording’ what happens, with no real input from the
photographer.
Let’s get down to it. How many times have you used the “time
exposure” facility on your camera? So when was the last time you tried using a
time exposure? Probably “never”! That is the usual response to that question.
The reason for this is simple. It all sounds too complicated,
you need to have a tripod, don’t know how to work it out, the list goes on. It
is a shame that people feel this way, because you can get some spectacular shots
with time exposure and it really isn’t all that difficult these days. Let me
show you how!
Let’s address the “too technical” first. A camera is purely a
device that lets a certain amount of light fall onto electronic sensors for a
predetermined amount of time. This is the old “f8 at 1/60th”
sort of routine (also known as the photojournalists creed - f8 and Be
There!). The number of the “f” stop (the aperture) tells you how large
the hole is that lets the light in, and the 1/60th denotes
how long the hole was left open. Is that really technical? No!
What do you need for Time Exposure photography? Well, a
camera is a good start, but it has to be one with “T” or “B” settings. The “T”
setting stands for Time Exposure - one “click” opens the shutter, the second
“click” closes it. “B” originally stood for “bulb” and the way that works is by
holding the shutter release down keeps the shutter open until you take your
finger off, which closes it. Why two settings? Simple, use “B” for time
exposures up to a minute and “T” for longer ones (mainly because your finger
will go numb holding the button down for 20 minutes!).
What ISO speed rating should you use? I am sure your DSLR has
400 ASA which is fine (but you can use anything, I generally just use the
standard 100 ASA I use for everything). Now you may have read about “reciprocity
failure” with long time exposures. Give up reading! It’s photo industry
techo-talk and won’t stop you getting good pictures, it just could change the
colors a bit, but with digital cameras this is not a worry either, most digitals
compensate by themselves.
The final piece of equipment you need is a tripod, but even
that is not 100 percent necessary. But it is easier with one.
The important point to grasp, is that all Time Exposure
photography is “hit and miss”. There’s no real way anyone can tell you exactly “f8
and 24 seconds”. There’s too many variables, but all you have to do is to take
the same scene or picture with several different exposure times - one of them
will be right. Believe me!
Here’s the rough guides. In all of these the aperture (f
stop) is set on f8. Now to take a street scene at night, try 2 seconds, 4
seconds and 8 seconds. For the interior of a room, lit with ordinary light
bulbs, try 5 seconds, 10 seconds and 20 seconds. To take a picture, just before
dawn try 5, 10 and 20 seconds. Now, for a completely dark, night landscape (or
seascape) try 30 seconds, 1 minute and 2 minutes. And for a different sunset,
try one second and half a second.
Make a note of the order your time exposures were shot in,
and note the “best” result. Sure, sometimes colors will be strangely different -
but if you wanted a “normal” shot you’d have taken it in daylight, wouldn’t you?